View Single Post
  #8 (permalink)  
Old 01-25-2006, 09:48 PM
princeG's Avatar
princeG princeG is offline
BigBlueBall Alumni
 

Join Date: Oct 2004
Location: Athens, Greece.
Posts: 1,698
princeG has left a lasting impression (500)princeG has left a lasting impression (500)princeG has left a lasting impression (500)princeG has left a lasting impression (500)princeG has left a lasting impression (500)princeG has left a lasting impression (500)
Send a message via AIM to princeG Send a message via MSN to princeG Send a message via Yahoo to princeG Send a message via Skype™ to princeG
Having problems signing in? Here is a list of possible solutions.
  1. The date on your computer needs to be set properly -- double click the clock verify that the time and date are set.
  2. If your password information is not saved, verify that you are typing it in with the correct case (uppercase or lowercase).
  3. Change your password @ https://login.passport.com/ChangePW.srf to something smaller (under 10-12 characters), then try signing in again.
  4. If you use a firewall (like ZoneAlarm, Norton Internet Security etc. ), it's possible that Messenger doesn't have the correct rights to access the Internet, especially since you upgraded. You may need to re/add Messenger to the allowed list of programs in your firewall if this is the case.
  5. If you disabled your firewall in the past, it still may be blocking Messenger -- try restarting it and see if that helps the situation. You also might try uninstalling an installed firewall, to verify that it isn't causing a problem (even if it is disabled).
  6. Clear your IE cache and cookies -- open Internet Explorer, click the Tools menu, then Internet Options, then click the Delete Files button, and when that's complete click the Delete Cookies button.
  7. Check your IE Security settings -- open Internet Explorer, click the Tools menu, then Internet Options, then Advanced tab, scroll to the Security section, and verify that "Check for server certificate revocation" is unchecked. Also verify that 'Use SSL 2.0' and Use SSL 3.0' is checked, then click OK.
  8. Click Start, then Run, and enter the following:

    regsvr32 softpub.dll

    then click OK

    and do the same for the following:

    regsvr32 wintrust.dll

    regsvr32 initpki.dll

    regsvr32 MSXML3.dll

The road to success is always under construction.

>:_ 4 8 15 16 23 42

Last edited by shifter; 01-25-2006 at 11:08 PM.